Idea
In short
How do you build a greenhouse carbon dioxide monitor?
An SCD30 reads carbon dioxide, temperature and humidity in a polytunnel, so you can see when plants use up the CO2 and when to ventilate. You need ESP32 DevKit V1, SCD30 CO2 sensor, SSD1306 OLED Display and 5 V 2 A USB adapter.
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read a non-dispersive infrared CO2 sensor and understand its warm-up and calibration.
Parts list
- Development Boards
- Sensors
- Displays
- Power
How to build it
- Wire the SCD30 on I2C
- Let it warm up and set the altitude
- Show CO2 in ppm on the screen
- Log every minute
- Compare morning, noon and evening
Common questions
What parts do I need for the greenhouse carbon dioxide monitor?
ESP32 DevKit V1, SCD30 CO2 sensor, SSD1306 OLED Display and 5 V 2 A USB adapter.
How long does the greenhouse carbon dioxide monitor take to build?
About 120 minutes for a intermediate maker.
