Idea
In short
How do you build a crop sprayer pump controller?
A pump and nozzle controller keeps spray rate steady as the sprayer speed changes. You need ESP32 DevKit V1, Water flow sensor YF-S201, Mini submersible water pump (3 to 6 V), MOSFET IRLZ44N, Rectifier Diode 1N4007, GPS module NEO-6M and SSD1306 OLED Display.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Control flow from speed.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Semiconductors
- Semiconductors
- Sensors
- Displays
How to build it
- Read ground speed from GPS
- Read flow
- Adjust pump PWM to keep litres per hectare
- Show the rate
- Alarm if a nozzle blocks
Common questions
What parts do I need for the crop sprayer pump controller?
ESP32 DevKit V1, Water flow sensor YF-S201, Mini submersible water pump (3 to 6 V), MOSFET IRLZ44N, Rectifier Diode 1N4007, GPS module NEO-6M and SSD1306 OLED Display.
How long does the crop sprayer pump controller take to build?
About 240 minutes for a intermediate maker.
