SCD30 CO2 sensor
NDIR CO2 module with temperature and humidity.
MeasuresCO2, temperature, humidity
Range400 to 10 000 ppm
Accuracy±(30 ppm + 3 %)
InterfaceI2C, UART or PWM
SensorsReviewedMPN SCD30Used in 2 projects
In short
What is the SCD30 CO2 sensor and what is it used for?
NDIR CO2 module with temperature and humidity. Makers use it for accurate CO2 logging.
How it works
An NDIR CO2 sensor with dual-channel measurement for long-term stability.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | CO2, temperature, humidity |
| Range | 400 to 10 000 ppm |
| Accuracy | ±(30 ppm + 3 %) |
| Interface | I2C, UART or PWM |
| Supply voltage | 3.3 to 5.5 V |
Pinout
VIN3.3 to 5.5 V
GNDGround
TX/SCLUART TX or I2C clock
RX/SDAUART RX or I2C data
RDYData ready
PWMPWM output
SELInterface select
How to use it
Use the SparkFun or Adafruit SCD30 library over I2C at 50 kHz or less, as it uses clock stretching. Readings every 2 s by default.
Applications
Accurate CO2 logging
Alternatives
- SCD40 CO2 sensorSmaller and cheaper
Common questions
What is the SCD30 CO2 sensor used for?
In maker projects: accurate CO2 logging.
How does the SCD30 CO2 sensor work?
An NDIR CO2 sensor with dual-channel measurement for long-term stability.
What voltage does the SCD30 CO2 sensor need?
3.3 to 5.5 V.
How do I connect the SCD30 CO2 sensor to an Arduino or ESP32?
I2C, UART or PWM. Pins: VIN (3.3 to 5.5 V), GND (Ground), TX/SCL (UART TX or I2C clock), RX/SDA (UART RX or I2C data), RDY (Data ready), PWM (PWM output).
What can I use instead of the SCD30 CO2 sensor?
SCD40 CO2 sensor.
