Idea
In short
How do you build a bridge health monitor model?
Accelerometers on a model bridge track its vibration under loads to learn structural monitoring. You need ESP32 DevKit V1, ADXL345 accelerometer × 2, MicroSD Card Module and SanDisk microSD card 32 GB (A1, Class 10).
- Level
- Advanced
- Time
- About 300 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure structural vibration.
Parts list
- Development Boards
- Sensors
- Interfaces
- SBC Accessories
How to build it
- Mount sensors on the span
- Record at 200 Hz
- Find the main frequency
- Add weights and see it change
- Alarm on large shifts
Common questions
What parts do I need for the bridge health monitor model?
ESP32 DevKit V1, ADXL345 accelerometer × 2, MicroSD Card Module and SanDisk microSD card 32 GB (A1, Class 10).
How long does the bridge health monitor model take to build?
About 300 minutes for a advanced maker.
