Idea
In short
How do you build an eight-step click sequencer?
A board of eight relays clicks in order and lights eight low-voltage LEDs, to learn relay wiring without any mains. Use low voltage only. You need Arduino Nano, Relay module 8-channel 5 V, LED 5 mm red × 8, Resistor 330 Ω × 8, Micro USB breakout board, 5 V 2 A USB adapter and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Learn relay wiring safely.
Parts list
- Development Boards
- Interfaces
- SemiconductorsLED 5 mm red × 8
- PassivesResistor 330 Ω × 8
- Connectors
- Power
- Prototyping
How to build it
- Power the board from its own supply
- Wire the control pins
- Switch one LED
- Run a sequence
- Add a speed knob
Common questions
What parts do I need for the eight-step click sequencer?
Arduino Nano, Relay module 8-channel 5 V, LED 5 mm red × 8, Resistor 330 Ω × 8, Micro USB breakout board, 5 V 2 A USB adapter and Breadboard 830 Tie Points.
How long does the eight-step click sequencer take to build?
About 210 minutes for a intermediate maker.
