Relay module 8-channel 5 V
Eight optocoupled relays.
Function8 × SPDT relays
Supply voltage5 V, about 0.6 A with all on
Interface8 inputs, active LOW
Rating10 A 250 V AC (derate)
InterfacesReviewedMPN 8CH relay moduleUsed in 1 project
In short
What is the Relay module 8-channel 5 V and what is it used for?
Eight optocoupled relays. Makers use it for home automation boards.
How it works
Eight optocoupled relay channels on one board.
Key specifications
| Interface module spec | Value |
|---|---|
| Function | 8 × SPDT relays |
| Supply voltage | 5 V, about 0.6 A with all on |
| Interface | 8 inputs, active LOW |
| Rating | 10 A 250 V AC (derate) |
| Logic level | 5 V |
Pinout
VCC GND5 V
IN1 to IN8Active low
JD-VCCCoil supply
COM NO NCContacts
How to use it
With all relays on it draws about 0.6 A, so power JD-VCC from its own 5 V supply. Use for home automation panels with proper mains safety.
Applications
Home automation boards
Builds that use it
Alternatives
- Relay module 4-channel 5 VFewer channels
Common questions
What is the Relay module 8-channel 5 V used for?
In maker projects: home automation boards.
How does the Relay module 8-channel 5 V work?
Eight optocoupled relay channels on one board.
What voltage does the Relay module 8-channel 5 V need?
5 V, about 0.6 A with all on.
How do I connect the Relay module 8-channel 5 V to an Arduino or ESP32?
8 inputs, active LOW. Pins: VCC GND (5 V), IN1 to IN8 (Active low), JD-VCC (Coil supply), COM NO NC (Contacts).
What can I use instead of the Relay module 8-channel 5 V?
Relay module 4-channel 5 V.
