Projects / Ideas / Bare-chip clock with an 8 MHz crystal

Bare-chip clock with an 8 MHz crystal

AdvancedLearningIdeaReviewed
In short

How do you build a bare-chip clock with an 8 MHz crystal?

Run a bare microcontroller chip on a breadboard with its own crystal, learning what a board does behind the scenes. You need Arduino Nano, Crystal 8 MHz, Ceramic capacitor 22 pF × 2, Resistor 10 kΩ, LED 5 mm red, Resistor 220 Ω, 5 V 2 A USB adapter and Breadboard 830 Tie Points.

Level
Advanced
Time
About 330 min
Parts
8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Build a minimal microcontroller circuit.

Parts list

How to build it

  1. Study the minimal circuit
  2. Wire the crystal and caps
  3. Add a reset pull-up
  4. Load a blink
  5. Measure the clock

Related projects

Common questions

What parts do I need for the bare-chip clock with an 8 MHz crystal?

Arduino Nano, Crystal 8 MHz, Ceramic capacitor 22 pF × 2, Resistor 10 kΩ, LED 5 mm red, Resistor 220 Ω, 5 V 2 A USB adapter and Breadboard 830 Tie Points.

How long does the bare-chip clock with an 8 MHz crystal take to build?

About 330 minutes for a advanced maker.