Projects / Ideas / Pet-tag feeder gate model

Pet-tag feeder gate model

IntermediateSmart HomeIdeaReviewed
In short

How do you build a pet-tag feeder gate model?

A tag reader recognises a pet tag and opens a servo flap on a model feeder for a few seconds. You need Arduino Nano, RDM6300 125 kHz RFID reader, 125 kHz RFID cards (EM4100) × 2, SG90 Micro Servo and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 240 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Open a model gate for a known tag.

Parts list

How to build it

  1. Read the tag number
  2. Store the allowed tags
  3. Open the servo for a known tag
  4. Close after a delay
  5. Log entries

Related projects

Common questions

What parts do I need for the pet-tag feeder gate model?

Arduino Nano, RDM6300 125 kHz RFID reader, 125 kHz RFID cards (EM4100) × 2, SG90 Micro Servo and Breadboard 830 Tie Points.

How long does the pet-tag feeder gate model take to build?

About 240 minutes for a intermediate maker.