Idea
In short
How do you build an aquarium light, heater and feeding controller?
One controller runs an aquarium's sunrise lights, keeps the water at 26 °C and feeds the fish twice a day with a servo. You need Arduino Nano, DS3231 RTC module, DS18B20 waterproof probe, Resistor 4.7 kΩ, Relay module 2-channel 5 V, MOSFET IRLZ44N, Resistor 10 kΩ, 12 V LED strip warm white (5 m, 2835), SG90 Micro Servo, 12 V 2 A DC adapter and LM2596 Buck Module.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 11
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Run several timed and temperature tasks together without delay().
Parts list
- Development Boards
- Sensors
- Sensors
- Passives
- Interfaces
- Semiconductors
- Passives
- Optoelectronics
- Motors & Actuators
- Power
- Power
How to build it
- Ramp the LED strip with PWM at sunrise and sunset
- Switch the heater with a relay and 0.5 °C hysteresis
- Turn a feeder drum with the servo at 9 am and 6 pm
- Use millis() so tasks never block each other
- Show everything on an LCD
Common questions
What parts do I need for the aquarium light, heater and feeding controller?
Arduino Nano, DS3231 RTC module, DS18B20 waterproof probe, Resistor 4.7 kΩ, Relay module 2-channel 5 V, MOSFET IRLZ44N, Resistor 10 kΩ, 12 V LED strip warm white (5 m, 2835), SG90 Micro Servo, 12 V 2 A DC adapter and LM2596 Buck Module.
How long does the aquarium light, heater and feeding controller take to build?
About 240 minutes for a intermediate maker.
