Idea
In short
How do you build an IR-remote toy tank?
A cheap IR remote steers a two-motor tank base through an IR receiver and motor driver. You need Arduino Uno R3, IR receiver VS1838B, TT gear motor 3 to 6 V × 2, L293D motor driver IC, 9 V battery, 9 V battery, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Decode IR remote codes into motion.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Motor Drivers
- Batteries
- Batteries
- Prototyping
- Prototyping
How to build it
- Read button codes with the IR receiver
- Map keys to motions
- Drive both motors
- Add speed up and down keys
- Stop after a lost signal
Related projects
Common questions
What parts do I need for the IR-remote toy tank?
Arduino Uno R3, IR receiver VS1838B, TT gear motor 3 to 6 V × 2, L293D motor driver IC, 9 V battery, 9 V battery, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the IR-remote toy tank take to build?
About 210 minutes for a intermediate maker.
