Projects / Ideas / Natural background radiation counter

Natural background radiation counter

AdvancedSensorsIdeaReviewed
In short

How do you build a natural background radiation counter?

A PIN photodiode amplifier counts events, to learn how particle detectors work, using a safe test source such as a smoke detector. You need Photodiode BPW34 × 2, TL072 dual JFET op-amp, Resistor 100 kΩ, Resistor 1 MΩ, Ceramic Capacitor 100 nF × 2, LM393 Comparator, Arduino Nano, SSD1306 OLED Display and Dual-rail ±12 V DC-DC module.

Level
Advanced
Time
About 480 min
Parts
9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Detect tiny pulses with a transimpedance amplifier.

Parts list

How to build it

  1. Build a shielded charge amplifier
  2. Add a comparator
  3. Count pulses
  4. Keep it in a metal box
  5. Treat any radioactive source with proper safety

Related projects

Common questions

What parts do I need for the natural background radiation counter?

Photodiode BPW34 × 2, TL072 dual JFET op-amp, Resistor 100 kΩ, Resistor 1 MΩ, Ceramic Capacitor 100 nF × 2, LM393 Comparator, Arduino Nano, SSD1306 OLED Display and Dual-rail ±12 V DC-DC module.

How long does the natural background radiation counter take to build?

About 480 minutes for a advanced maker.