Photodiode BPW34
Fast silicon photodiode for light measurement.
What is the Photodiode BPW34 and what is it used for?
Fast silicon photodiode for light measurement. Makers use it for light meters, optical receivers.
Light creates electron-hole pairs in the silicon, producing a current proportional to the light level.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Light 430 to 1100 nm |
| Interface | Current (use a transimpedance amplifier or resistor) |
Pinout
How to use it
For fast or linear light measurement, connect it reverse biased into an op-amp transimpedance amplifier: output voltage = photocurrent × feedback resistor. For a simple light trigger, a 1 MΩ resistor in series works.
Applications
Builds that use it
Alternatives
- LDR PhotoresistorEasier, slower relative light sensing
- BH1750 light sensorCalibrated lux readings on I2C
Common questions
What is the Photodiode BPW34 used for?
In maker projects: light meters, optical receivers.
How does the Photodiode BPW34 work?
Light creates electron-hole pairs in the silicon, producing a current proportional to the light level.
How do I connect the Photodiode BPW34 to an Arduino or ESP32?
Current (use a transimpedance amplifier or resistor). Pins: Anode (Shorter lead, or marked side), Cathode (Longer lead or marked with a notch).
What can I use instead of the Photodiode BPW34?
LDR Photoresistor and BH1750 light sensor.
