Idea
In short
How do you build a battery warmer for winter?
A heater keeps a lithium battery above freezing so it can be charged safely in cold weather. You need Arduino Nano, NTC thermistor 10 kΩ (B3950), Power resistor 10 Ω 5 W (cement), MOSFET IRLZ44N and 12 V 2 A DC adapter.
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Keep batteries warm.
Parts list
- Development Boards
- Sensors
- Passives
- Semiconductors
- Power
How to build it
- Read battery temperature
- Heat below 5 °C
- Allow charging only above 0 °C
- Insulate
- Log
Common questions
What parts do I need for the battery warmer for winter?
Arduino Nano, NTC thermistor 10 kΩ (B3950), Power resistor 10 Ω 5 W (cement), MOSFET IRLZ44N and 12 V 2 A DC adapter.
How long does the battery warmer for winter take to build?
About 120 minutes for a intermediate maker.
