Idea
In short
How do you build an inrush current demo with a capacitor bank?
See the spike when a big capacitor connects to a supply and how an NTC limiter smooths it, at low voltage only. You need Thermistor NTC 5D-11 (inrush limiter), Electrolytic Capacitor 100 µF × 4, Shunt resistor 0.1 Ω 2 W, 9 V battery, 9 V battery, Digital multimeter and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure inrush current safely.
Parts list
- Passives
- Passives
- Passives
- Batteries
- Batteries
- Tools & Instruments
- Prototyping
How to build it
- Connect a capacitor bank to a 9 V battery
- Measure the spike with a shunt
- Add the thermistor
- Compare peaks
- Do not use mains
Common questions
What parts do I need for the inrush current demo with a capacitor bank?
Thermistor NTC 5D-11 (inrush limiter), Electrolytic Capacitor 100 µF × 4, Shunt resistor 0.1 Ω 2 W, 9 V battery, 9 V battery, Digital multimeter and Breadboard 830 Tie Points.
How long does the inrush current demo with a capacitor bank take to build?
About 150 minutes for a intermediate maker.
