Idea
In short
How do you build a mini Peltier cooler?
A Peltier module and heatsink cool a small box, with a thermostat. You need Arduino Nano, DC-DC step-down 24 V to 12 V 10 A, Heatsink TO-220, 12 V DC fan 80 mm × 2, DS18B20 Temperature Sensor, Relay module 1-channel 12 V and 12 V 2 A DC adapter.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a thermoelectric cooler.
Parts list
- Development Boards
- PowerDrives a Peltier module
- Tools & InstrumentsLarge heatsinks both sides
- Motors & Actuators
- Sensors
- Interfaces
- Power
How to build it
- Mount heatsinks both sides
- Cool with fans
- Set target temperature
- Watch the hot-side temperature
- Insulate the box
Common questions
What parts do I need for the mini Peltier cooler?
Arduino Nano, DC-DC step-down 24 V to 12 V 10 A, Heatsink TO-220, 12 V DC fan 80 mm × 2, DS18B20 Temperature Sensor, Relay module 1-channel 12 V and 12 V 2 A DC adapter. DC-DC step-down 24 V to 12 V 10 A: Drives a Peltier module. Heatsink TO-220: Large heatsinks both sides.
How long does the mini Peltier cooler take to build?
About 180 minutes for a intermediate maker.
