Idea
In short
How do you build a darlington switch for a 12 V fan?
A Darlington transistor switches a 12 V fan from a 5 V pin, and you measure the voltage lost across it. You need Arduino Nano, TIP120 Darlington transistor, 12 V DC fan 80 mm, Rectifier Diode 1N4007, Resistor 1 kΩ, 12 V 2 A DC adapter and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 150 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Switch a load with a Darlington.
Parts list
- Development Boards
- Semiconductors
- Motors & Actuators
- Semiconductors
- Passives
- Power
- Prototyping
How to build it
- Wire the Darlington with a base resistor
- Add the flyback diode
- Switch the fan from the Nano
- Measure the voltage across the transistor
- Compare with a MOSFET
Common questions
What parts do I need for the darlington switch for a 12 V fan?
Arduino Nano, TIP120 Darlington transistor, 12 V DC fan 80 mm, Rectifier Diode 1N4007, Resistor 1 kΩ, 12 V 2 A DC adapter and Breadboard 830 Tie Points.
How long does the darlington switch for a 12 V fan take to build?
About 150 minutes for a beginner maker.
