Idea
In short
How do you build a hand-crank phone charger?
A geared motor turned by hand makes power, rectified and boosted to 5 V. You need Johnson geared motor 300 RPM 12 V, Bridge rectifier DB107 (1 A), Electrolytic capacitor 1000 µF, MT3608 Boost Module, USB-A female breakout and Supercapacitor 5.5 V 1 F.
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Harvest human power.
Parts list
- Motors & Actuators
- Semiconductors
- Passives
- Power
- Connectors
- Power
How to build it
- Crank the motor as a generator
- Rectify
- Buffer
- Boost to 5 V
- Measure watts
Common questions
What parts do I need for the hand-crank phone charger?
Johnson geared motor 300 RPM 12 V, Bridge rectifier DB107 (1 A), Electrolytic capacitor 1000 µF, MT3608 Boost Module, USB-A female breakout and Supercapacitor 5.5 V 1 F.
How long does the hand-crank phone charger take to build?
About 120 minutes for a intermediate maker.
