LIS3DH accelerometer
Low-power 3-axis accelerometer with tap and free-fall interrupts.
MeasuresAcceleration
Range±2 to ±16 g
InterfaceI2C or SPI
I2C address0x18 or 0x19
SensorsReviewedMPN LIS3DHUsed in 14 projects
In short
What is the LIS3DH accelerometer and what is it used for?
Low-power 3-axis accelerometer with tap and free-fall interrupts. Makers use it for wearables.
How it works
A low-power MEMS accelerometer.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Acceleration |
| Range | ±2 to ±16 g |
| Interface | I2C or SPI |
| I2C address | 0x18 or 0x19 |
| Supply voltage | 1.71 to 3.6 V |
Pinout
VIN3.3 to 5 V on modules
GNDGround
SCLI2C or SPI clock
SDAI2C data or SPI
SDOAddress 0x18 or 0x19
CSHigh for I2C
INT1 and INT2Interrupts
ADC1 to ADC3Auxiliary analog inputs
How to use it
Use the Adafruit LIS3DH library. Its low-power modes and tap or motion interrupts suit battery wearables.
Applications
Wearables
Builds that use it
Guided build
Step counter wristband
Guided build
Ladder tilt alarm
Guided build
Bike tail light with brake flash
Guided build
Running safety vest with lights
Guided build
Walking cadence trainer
Guided build
Sleep movement tracker
Guided build
Pet activity collar
Idea
Bicycle anti-theft alarm with GPS
Showing 8 of 14
Alternatives
- ADXL345 accelerometerWidely documented
Common questions
What is the LIS3DH accelerometer used for?
In maker projects: wearables.
How does the LIS3DH accelerometer work?
A low-power MEMS accelerometer.
What voltage does the LIS3DH accelerometer need?
1.71 to 3.6 V.
How do I connect the LIS3DH accelerometer to an Arduino or ESP32?
I2C or SPI. Pins: VIN (3.3 to 5 V on modules), GND (Ground), SCL (I2C or SPI clock), SDA (I2C data or SPI), SDO (Address 0x18 or 0x19), CS (High for I2C).
What can I use instead of the LIS3DH accelerometer?
ADXL345 accelerometer.
