Projects / Ideas / Pitch-matching trainer

Pitch-matching trainer

IntermediateLearningIdeaReviewed
In short

How do you build a pitch-matching trainer?

A microphone listens to you humming a note and lights an LED if you are flat, in tune or sharp compared with a target note you pick. A good way to practise singing in tune and to learn how a Nano can measure a pitch. It records no sound. You need Arduino Nano, MAX4466 microphone module, Tactile push button 6 mm × 2, LED 5 mm red, LED 5 mm green, Resistor 220 Ω × 2, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

Level
Intermediate
Time
About 100 min
Parts
8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Show if a hummed note is flat, sharp or right.

How to build it

  1. Pick a target note with buttons
  2. Read the microphone quickly
  3. Count wave crossings to find the pitch
  4. Compare with the target
  5. Light the flat, in-tune or sharp LED

Related projects

Common questions

What parts do I need for the pitch-matching trainer?

Arduino Nano, MAX4466 microphone module, Tactile push button 6 mm × 2, LED 5 mm red, LED 5 mm green, Resistor 220 Ω × 2, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

How long does the pitch-matching trainer take to build?

About 100 minutes for a intermediate maker.