Projects / Ideas / PIC first blink with PICkit 3

PIC first blink with PICkit 3

IntermediateLearningIdeaReviewed
In short

How do you build a PIC first blink with PICkit 3?

Program a classic PIC chip from a free toolchain using a PICkit 3, and learn how its pins and configuration bits differ from an Arduino. You need PICkit 3 programmer, PIC16F877A microcontroller, LED 5 mm red, Resistor 330 Ω, Resistor 10 kΩ, Tactile push button 6 mm, Electrolytic capacitor 10 µF and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Program a PIC chip.

How to build it

  1. Check the pin map
  2. Wire the programming header
  3. Set the configuration bits
  4. Flash a blink
  5. Add a button

Related projects

Common questions

What parts do I need for the PIC first blink with PICkit 3?

PICkit 3 programmer, PIC16F877A microcontroller, LED 5 mm red, Resistor 330 Ω, Resistor 10 kΩ, Tactile push button 6 mm, Electrolytic capacitor 10 µF and Breadboard 830 Tie Points.

How long does the PIC first blink with PICkit 3 take to build?

About 210 minutes for a intermediate maker.