Idea
In short
How do you build a blue Pill first blink with ST-Link?
A first step on an STM32 board: install the tools, flash a blink program with an ST-Link and add a button. You need STM32 Blue Pill (STM32F103C8T6), ST-Link V2 programmer (clone), LED 5 mm red, Resistor 330 Ω, Tactile push button 6 mm and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Flash an STM32 board.
Parts list
- Development Boards
- Interfaces
- Semiconductors
- Passives
- Switches
- Prototyping
How to build it
- Install the tools
- Connect the ST-Link
- Flash a blink
- Add an LED and button
- Read the button
Common questions
What parts do I need for the blue Pill first blink with ST-Link?
STM32 Blue Pill (STM32F103C8T6), ST-Link V2 programmer (clone), LED 5 mm red, Resistor 330 Ω, Tactile push button 6 mm and Breadboard 830 Tie Points.
How long does the blue Pill first blink with ST-Link take to build?
About 210 minutes for a intermediate maker.
