Projects / Ideas / 8051 blink and serial hello

8051 blink and serial hello

IntermediateLearningIdeaReviewed
In short

How do you build a 8051 blink and serial hello?

A classic 8051 with an 11.0592 MHz crystal blinks an LED and sends text at 9600 baud, a good look at how older microcontrollers worked. You need AT89S52 8051 microcontroller, Crystal 11.0592 MHz, Ceramic capacitor 22 pF × 2, LED 5 mm red, Resistor 330 Ω, Tactile push button 6 mm, Resistor 10 kΩ, Electrolytic capacitor 10 µF and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Run the first 8051 programs.

How to build it

  1. Wire the crystal and reset
  2. Power the chip
  3. Program the blink
  4. Set up the serial timer
  5. Print a message

Related projects

Common questions

What parts do I need for the 8051 blink and serial hello?

AT89S52 8051 microcontroller, Crystal 11.0592 MHz, Ceramic capacitor 22 pF × 2, LED 5 mm red, Resistor 330 Ω, Tactile push button 6 mm, Resistor 10 kΩ, Electrolytic capacitor 10 µF and Breadboard 830 Tie Points.

How long does the 8051 blink and serial hello take to build?

About 210 minutes for a intermediate maker.