Idea
In short
How do you build a doorbell camera with Pi?
A Pi with a camera and a button streams video and sends a notification when someone rings. You need Raspberry Pi Zero 2 W, Raspberry Pi Camera Module 3, Tactile push button 6 mm, Active buzzer 5 V, SanDisk microSD card 32 GB (A1, Class 10) and Waterproof enclosure IP65 (junction box).
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Make a video doorbell.
Parts list
- Single Board Computers
- SBC Accessories
- Switches
- Motors & Actuators
- SBC Accessories
- Mechanical & Hardware
How to build it
- Stream video on the network
- Detect the button
- Send a phone notification
- Save a clip
- Seal it from rain
Common questions
What parts do I need for the doorbell camera with Pi?
Raspberry Pi Zero 2 W, Raspberry Pi Camera Module 3, Tactile push button 6 mm, Active buzzer 5 V, SanDisk microSD card 32 GB (A1, Class 10) and Waterproof enclosure IP65 (junction box).
How long does the doorbell camera with Pi take to build?
About 240 minutes for a intermediate maker.
