Projects / Ideas / Home CCTV server on a Raspberry Pi

Home CCTV server on a Raspberry Pi

IntermediateSecurityIdeaReviewed
In short

How do you build a home CCTV server on a Raspberry Pi?

A Raspberry Pi runs motionEye to record and view two cameras, with motion detection and recordings saved to a USB drive. You need Raspberry Pi 4 Model B (4 GB), Raspberry Pi 15 W USB-C power supply, SanDisk microSD card 32 GB (A1, Class 10), Raspberry Pi Camera Module 3, Arducam 5 MP OV5647 camera for Raspberry Pi and Ethernet cable Cat6 (3 m).

Level
Intermediate
Time
About 240 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Install a camera server and manage storage and access securely.

How to build it

  1. Install motionEye on Raspberry Pi OS
  2. Add the Pi camera and a network camera
  3. Set motion detection zones and sensitivity
  4. Save clips to a USB drive and delete old ones automatically
  5. Change the admin password and do not open it to the internet without a VPN

Related projects

Common questions

What parts do I need for the home CCTV server on a Raspberry Pi?

Raspberry Pi 4 Model B (4 GB), Raspberry Pi 15 W USB-C power supply, SanDisk microSD card 32 GB (A1, Class 10), Raspberry Pi Camera Module 3, Arducam 5 MP OV5647 camera for Raspberry Pi and Ethernet cable Cat6 (3 m).

How long does the home CCTV server on a Raspberry Pi take to build?

About 240 minutes for a intermediate maker.