Projects / Ideas / Light gate for sprint timing

Light gate for sprint timing

IntermediateTest & MeasurementIdeaReviewed
In short

How do you build a light gate for sprint timing?

Two photodiode light gates time a runner or a toy car between them, accurate to a millisecond. You need Arduino Nano, Photodiode BPW34 × 2, LM358 Op-Amp, Laser diode module 5 V (red, 650 nm) × 2 and 16x2 LCD with I2C backpack (PCF8574).

Level
Intermediate
Time
About 150 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Time events with interrupts from two sensors.

Parts list

How to build it

  1. Aim a laser at each photodiode
  2. Amplify and square the signal
  3. Time from the first to second trigger
  4. Show elapsed time and speed
  5. Use low-power pointers and never aim them at eyes

Related projects

Common questions

What parts do I need for the light gate for sprint timing?

Arduino Nano, Photodiode BPW34 × 2, LM358 Op-Amp, Laser diode module 5 V (red, 650 nm) × 2 and 16x2 LCD with I2C backpack (PCF8574).

How long does the light gate for sprint timing take to build?

About 150 minutes for a intermediate maker.