Idea
In short
How do you build a drinking water TDS checker?
A TDS probe shows total dissolved solids in a glass of water, useful for comparing tap, filtered and bottled water. You need Arduino Nano, TDS sensor module, DS18B20 waterproof probe, Resistor 4.7 kΩ and SSD1306 OLED Display.
- Level
- Beginner
- Time
- About 90 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Convert a conductivity reading into a TDS value with temperature compensation.
Parts list
- Development Boards
- Sensors
- Sensors
- Passives
- Displays
How to build it
- Read the TDS voltage
- Read the water temperature
- Compensate the reading for temperature
- Show TDS in ppm
- Compare several waters and remember the probe is not a safety test
Common questions
What parts do I need for the drinking water TDS checker?
Arduino Nano, TDS sensor module, DS18B20 waterproof probe, Resistor 4.7 kΩ and SSD1306 OLED Display.
How long does the drinking water TDS checker take to build?
About 90 minutes for a beginner maker.
