Projects / Ideas / Plant feed dosing demo

Plant feed dosing demo

AdvancedAgricultureIdeaReviewed
In short

How do you build a plant feed dosing demo?

A small pump doses a set amount of water or diluted feed to a plant on a schedule, with a manual override. Use plain water for first tests. You need Arduino Nano, Peristaltic pump 12 V, MOSFET IRLZ44N, Rectifier Diode 1N4007, Resistor 10 kΩ, DS3231 RTC module, 12 V 2 A DC adapter and Breadboard 830 Tie Points.

Level
Advanced
Time
About 330 min
Parts
8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Dose liquid precisely.

Parts list

How to build it

  1. Calibrate millilitres per second
  2. Wire the pump driver
  3. Dose at a set time
  4. Add a manual button
  5. Log each dose

Related projects

Common questions

What parts do I need for the plant feed dosing demo?

Arduino Nano, Peristaltic pump 12 V, MOSFET IRLZ44N, Rectifier Diode 1N4007, Resistor 10 kΩ, DS3231 RTC module, 12 V 2 A DC adapter and Breadboard 830 Tie Points.

How long does the plant feed dosing demo take to build?

About 330 minutes for a advanced maker.