Projects / Ideas / Neat perfboard layout practice

Neat perfboard layout practice

BeginnerLearningIdeaReviewed
In short

How do you build a neat perfboard layout practice?

You turn a breadboard Arduino circuit into a clean perfboard build with planned wire runs. You need Perfboard (dot PCB) 7 × 9 cm, Solder wire 60/40 (0.8 mm, 50 g), Soldering flux paste, Desoldering wick (braid), Arduino Nano, LED 5 mm red and Resistor 220 Ω.

Level
Beginner
Time
About 180 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Practise good soldering layout.

Parts list

How to build it

  1. Plan the layout on paper
  2. Place and tack the parts
  3. Solder the joints
  4. Check for bridges
  5. Test and fix

Related projects

Common questions

What parts do I need for the neat perfboard layout practice?

Perfboard (dot PCB) 7 × 9 cm, Solder wire 60/40 (0.8 mm, 50 g), Soldering flux paste, Desoldering wick (braid), Arduino Nano, LED 5 mm red and Resistor 220 Ω.

How long does the neat perfboard layout practice take to build?

About 180 minutes for a beginner maker.