Projects / Ideas / Desoldering practice

Desoldering practice

BeginnerLearningIdeaReviewed
In short

How do you build a desoldering practice?

Solder parts onto a scrap board and then remove them with a pump and with braid to learn which works best for which joint. You need Desoldering pump (solder sucker), Desoldering wick (braid), Soldering stand with sponge, Perfboard (dot PCB) 7 × 9 cm and Lead-free solder wire (SAC305).

Level
Beginner
Time
About 120 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Learn to desolder cleanly.

Parts list

How to build it

  1. Solder six parts
  2. Remove two with the pump
  3. Remove two with braid
  4. Remove two with both
  5. Check the pads for damage

Related projects

Common questions

What parts do I need for the desoldering practice?

Desoldering pump (solder sucker), Desoldering wick (braid), Soldering stand with sponge, Perfboard (dot PCB) 7 × 9 cm and Lead-free solder wire (SAC305).

How long does the desoldering practice take to build?

About 120 minutes for a beginner maker.