Idea
In short
How do you build a teach-and-replay robot arm?
A four-axis arm records poses from knobs and replays them in a loop. You need Arduino Nano, Robot arm kit 4-DOF (acrylic, SG90), PCA9685 16-channel servo driver, Potentiometer 10 kΩ × 4, 5 V 2 A USB adapter and Breadboard 830 Tie Points.
- Level
- Advanced
- Time
- About 420 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Store and replay servo positions.
Parts list
- Development Boards
- Motors & Actuators
- Motor Drivers
- Passives
- Power
- Prototyping
How to build it
- Assemble the arm
- Read four knobs
- Move the servos
- Save poses
- Replay with timing
Related projects
Common questions
What parts do I need for the teach-and-replay robot arm?
Arduino Nano, Robot arm kit 4-DOF (acrylic, SG90), PCA9685 16-channel servo driver, Potentiometer 10 kΩ × 4, 5 V 2 A USB adapter and Breadboard 830 Tie Points.
How long does the teach-and-replay robot arm take to build?
About 420 minutes for a advanced maker.
