Projects / Ideas / Nucleo user button and LED lab

Nucleo user button and LED lab

IntermediateLearningIdeaReviewed
In short

How do you build a nucleo user button and LED lab?

A first STM32 board with a built-in programmer: blink the user LED, read the button and add an outside LED. You need STM32 Nucleo-64, LED 5 mm red, Resistor 330 Ω, Tactile push button 6 mm and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Start with a Nucleo board.

Parts list

How to build it

  1. Install the tools
  2. Flash the blink
  3. Read the user button
  4. Add an LED
  5. Print over the USB serial

Related projects

Common questions

What parts do I need for the nucleo user button and LED lab?

STM32 Nucleo-64, LED 5 mm red, Resistor 330 Ω, Tactile push button 6 mm and Breadboard 830 Tie Points.

How long does the nucleo user button and LED lab take to build?

About 210 minutes for a intermediate maker.