Projects / Ideas / Quiet stepper slide

Quiet stepper slide

AdvancedMotionIdeaReviewed
In short

How do you build a quiet stepper slide?

A modern driver chip runs a stepper almost silently on a small slide, and you compare it with a basic driver. You need Arduino Nano, TMC2209 stepper driver, NEMA 17 stepper motor, Limit switch (micro switch with lever), 12 V 2 A DC adapter and Breadboard 830 Tie Points.

Level
Advanced
Time
About 300 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Compare stepper drivers.

How to build it

  1. Read the driver notes
  2. Set current
  3. Move at several speeds
  4. Compare noise with an A4988
  5. Note the heat

Related projects

Common questions

What parts do I need for the quiet stepper slide?

Arduino Nano, TMC2209 stepper driver, NEMA 17 stepper motor, Limit switch (micro switch with lever), 12 V 2 A DC adapter and Breadboard 830 Tie Points.

How long does the quiet stepper slide take to build?

About 300 minutes for a advanced maker.