Idea
In short
How do you build a music-reactive LED bar?
A microphone drives a ten-LED bar graph that rises and falls with the loudness of music. You need Arduino Uno R3, MAX4466 microphone module, LED 5 mm red × 5, LED 5 mm green × 5, Resistor 220 Ω × 10, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure sound level and show it on LEDs.
Parts list
- Development Boards
- Sensors
- SemiconductorsLED 5 mm red × 5
- SemiconductorsLED 5 mm green × 5
- PassivesResistor 220 Ω × 10
- Prototyping
- Prototyping
How to build it
- Read the microphone output
- Find the peak in a short window
- Map level to the LED bar
- Add a peak-hold LED
- Calibrate the gain for a quiet room
Related projects
Common questions
What parts do I need for the music-reactive LED bar?
Arduino Uno R3, MAX4466 microphone module, LED 5 mm red × 5, LED 5 mm green × 5, Resistor 220 Ω × 10, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the music-reactive LED bar take to build?
About 150 minutes for a intermediate maker.
