Idea
In short
How do you build a sound level bar graph?
An amplifier and a rectifier turn microphone sound into a slow voltage that lights a row of LEDs. You need Arduino Nano, MAX4466 microphone module, LED 5 mm red × 5, Resistor 220 Ω × 5 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Show loudness as lit bars.
Parts list
- Development Boards
- Sensors
- SemiconductorsLED 5 mm red × 5
- PassivesResistor 220 Ω × 5
- Prototyping
How to build it
- Wire the microphone module
- Sample for a short window
- Find peak-to-peak
- Map loudness to bars
- Add a slow fall-off
Related projects
Common questions
What parts do I need for the sound level bar graph?
Arduino Nano, MAX4466 microphone module, LED 5 mm red × 5, Resistor 220 Ω × 5 and Breadboard 830 Tie Points.
How long does the sound level bar graph take to build?
About 210 minutes for a intermediate maker.
