Idea
In short
How do you build an MPPT solar tracker study with a buck converter?
Measure a solar panel's power at different loads and write a perturb-and-observe routine that finds the maximum power point. You need ESP32 DevKit V1, INA219 Current Monitor × 2, IR2110 MOSFET gate driver, IRF3205 N-channel MOSFET × 2, Toroid inductor 100 µH 3 A, Electrolytic capacitor 470 µF × 2, Solar panel 12 V 10 W and 12 V 7 Ah sealed lead acid battery.
- Level
- Advanced
- Time
- About 600 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Understand the I-V curve of a panel and track its maximum power point.
Parts list
- Development Boards
- Sensors
- Integrated Circuits
- Semiconductors
- Passives
- Passives
- Power
- Batteries
How to build it
- Plot the panel's I-V curve with a variable load
- Build a synchronous buck stage with the IR2110
- Measure input power with one INA219
- Change the duty cycle a little and keep the change if power rises
- Compare harvested energy with a plain PWM controller
Common questions
What parts do I need for the MPPT solar tracker study with a buck converter?
ESP32 DevKit V1, INA219 Current Monitor × 2, IR2110 MOSFET gate driver, IRF3205 N-channel MOSFET × 2, Toroid inductor 100 µH 3 A, Electrolytic capacitor 470 µF × 2, Solar panel 12 V 10 W and 12 V 7 Ah sealed lead acid battery.
How long does the MPPT solar tracker study with a buck converter take to build?
About 600 minutes for a advanced maker.
