Components / Integrated circuits / IR2110 MOSFET gate driver

IR2110 MOSFET gate driver

High and low side gate driver for half bridges.

FunctionHigh and low side driver
Supply voltage10 to 20 V gate
SpeedUp to about 500 kHz
PackageDIP-14
Integrated CircuitsReviewedMPN IR2110PBFUsed in 2 projects
IR2110
In short

What is the IR2110 MOSFET gate driver and what is it used for?

High and low side gate driver for half bridges. Makers use it for inverters and motor drivers.

How it works

Level-shifts a logic signal up to the floating high-side MOSFET source and provides amps of gate current.

Key specifications

Integrated circuit specValue
FunctionHigh and low side driver
Supply voltage10 to 20 V gate
SpeedUp to about 500 kHz
PackageDIP-14

Pinout

1LO, low-side gate output
2COM
3VCC, 10 to 20 V
5VS, high-side source return
6VB, bootstrap supply
7HO, high-side gate output
9VDD, logic supply
10HIN
11SD, shutdown
12LIN
13VSS, logic ground
4, 8, 14Not connected

How to use it

Drives a half bridge of N-channel MOSFETs. The high side needs a bootstrap diode (fast, such as UF4007) and capacitor (about 1 to 10 µF) between VB and VS. Add dead time in your PWM so both MOSFETs are never on together.

Applications

Alternatives

Buy at

Common questions

What is the IR2110 MOSFET gate driver used for?

In maker projects: inverters and motor drivers.

How does the IR2110 MOSFET gate driver work?

Level-shifts a logic signal up to the floating high-side MOSFET source and provides amps of gate current.

What voltage does the IR2110 MOSFET gate driver need?

10 to 20 V gate.

What can I use instead of the IR2110 MOSFET gate driver?

MOSFET IRLZ44N.