Idea
In short
How do you build an MOSFET threshold voltage lab?
Raise the gate voltage on a MOSFET and find where it starts to conduct. You need Arduino Uno R3, 2N7000 N-channel MOSFET, Potentiometer 10 kΩ, Resistor 1 kΩ, Resistor 10 kΩ, Digital multimeter and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure a gate threshold.
Parts list
- Development Boards
- Semiconductors
- Passives
- Passives
- Passives
- Tools & Instruments
- Prototyping
How to build it
- Wire the MOSFET with a drain resistor
- Raise the gate voltage
- Record drain current
- Find the knee
- Compare with the datasheet
Common questions
What parts do I need for the MOSFET threshold voltage lab?
Arduino Uno R3, 2N7000 N-channel MOSFET, Potentiometer 10 kΩ, Resistor 1 kΩ, Resistor 10 kΩ, Digital multimeter and Breadboard 830 Tie Points.
How long does the MOSFET threshold voltage lab take to build?
About 150 minutes for a intermediate maker.
