Idea
In short
How do you build a modbus HMI panel?
A Nextion panel reads and writes registers in a Modbus device through an Arduino gateway. You need Arduino Mega 2560 R3, Nextion 7 inch HMI display, RS485 to TTL auto-direction module, 12 V 2 A DC adapter and LM2596 Buck Module.
- Level
- Advanced
- Time
- About 360 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build an operator panel for Modbus equipment.
Parts list
- Development Boards
- Displays
- Interfaces
- Power
- Power
How to build it
- Map device registers to screen values
- Poll registers over RS-485
- Write setpoints from the touchscreen
- Show alarms
- Add operator and engineer access levels
Common questions
What parts do I need for the modbus HMI panel?
Arduino Mega 2560 R3, Nextion 7 inch HMI display, RS485 to TTL auto-direction module, 12 V 2 A DC adapter and LM2596 Buck Module.
How long does the modbus HMI panel take to build?
About 360 minutes for a advanced maker.
