Idea
In short
How do you build a palletising arm model?
A 6-DOF arm picks boxes from a conveyor and stacks them in a pattern on a pallet. You need Arduino Mega 2560 R3, Robotic arm 6-DOF metal kit, PCA9685 16-channel servo driver, IR obstacle avoidance sensor module, SMPS 12 V 5 A (metal case) and LM2596 Buck Module.
- Level
- Advanced
- Time
- About 480 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Program pick-and-place paths.
Parts list
- Development Boards
- Mechanical & Hardware
- Motor Drivers
- Sensors
- Power
- Power
How to build it
- Teach pick and place points
- Plan a stacking pattern
- Wait for a box at the sensor
- Pick and stack
- Count layers
Common questions
What parts do I need for the palletising arm model?
Arduino Mega 2560 R3, Robotic arm 6-DOF metal kit, PCA9685 16-channel servo driver, IR obstacle avoidance sensor module, SMPS 12 V 5 A (metal case) and LM2596 Buck Module.
How long does the palletising arm model take to build?
About 480 minutes for a advanced maker.
