RS485 to TTL auto-direction module
RS-485 board that switches direction by itself, works at 3.3 V.
FunctionRS-485 with auto direction
Supply voltage3.3 to 5 V
InterfaceTX, RX
Logic level3.3 or 5 V
InterfacesReviewedMPN TTL-RS485 autoUsed in 4 projects
In short
What is the RS485 to TTL auto-direction module and what is it used for?
RS-485 board that switches direction by itself, works at 3.3 V. Makers use it for ESP32 Modbus.
How it works
An RS-485 transceiver whose direction is switched automatically by the TX line.
Key specifications
| Interface module spec | Value |
|---|---|
| Function | RS-485 with auto direction |
| Supply voltage | 3.3 to 5 V |
| Interface | TX, RX |
| Logic level | 3.3 or 5 V |
Pinout
TXD RXDSerial
VCC3.3 to 5 V
GNDGround
A+ B-RS-485 pair
How to use it
Wire it like a serial port. The board switches direction itself, which is easier with ESP32 and Pi. Check it at your baud rate, as auto-direction can fail at high speeds.
Applications
ESP32 Modbus
Builds that use it
Alternatives
- RS485 to TTL module (MAX485)Manual direction, cheaper
Common questions
What is the RS485 to TTL auto-direction module used for?
In maker projects: ESP32 Modbus.
How does the RS485 to TTL auto-direction module work?
An RS-485 transceiver whose direction is switched automatically by the TX line.
What voltage does the RS485 to TTL auto-direction module need?
3.3 to 5 V.
How do I connect the RS485 to TTL auto-direction module to an Arduino or ESP32?
TX, RX. Pins: TXD RXD (Serial), VCC (3.3 to 5 V), GND (Ground), A+ B- (RS-485 pair).
What can I use instead of the RS485 to TTL auto-direction module?
RS485 to TTL module (MAX485).
