Idea
In short
How do you build a two-node CAN bus demo?
Two Arduinos with MCP2515 modules exchange sensor values over a CAN bus, as cars and machines do. You need Arduino Nano × 2, MCP2515 CAN bus module × 2, Potentiometer 10 kΩ, SSD1306 OLED Display and LED 5 mm red.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Send and receive CAN frames.
Parts list
- Development BoardsArduino Nano × 2
- Interfaces
- Passives
- Displays
- Semiconductors
How to build it
- Wire both modules
- Terminate the bus with 120 ohms
- Send a frame with a pot value
- Receive and show it
- Add an acknowledgement and error count
Common questions
What parts do I need for the two-node CAN bus demo?
Arduino Nano × 2, MCP2515 CAN bus module × 2, Potentiometer 10 kΩ, SSD1306 OLED Display and LED 5 mm red.
How long does the two-node CAN bus demo take to build?
About 150 minutes for a intermediate maker.
