Projects / Ideas / Phone to board two-button link

Phone to board two-button link

IntermediateCommunicationIdeaReviewed
In short

How do you build a phone to board two-button link?

A BLE module links a board to a phone terminal app so two phone buttons switch LEDs and the board reports a knob value. You need Arduino Nano, HM-10 BLE module, LED 5 mm red, LED 5 mm green, Resistor 330 Ω × 2, Potentiometer 10 kΩ, Resistor 1 kΩ, Resistor 4.7 kΩ and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 180 min
Parts
9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Link a board to a phone over BLE.

Parts list

How to build it

  1. Level-shift the module's receive line
  2. Check the module with AT commands
  3. Pair with a phone app
  4. Switch the LEDs
  5. Send the knob value back

Related projects

Common questions

What parts do I need for the phone to board two-button link?

Arduino Nano, HM-10 BLE module, LED 5 mm red, LED 5 mm green, Resistor 330 Ω × 2, Potentiometer 10 kΩ, Resistor 1 kΩ, Resistor 4.7 kΩ and Breadboard 830 Tie Points.

How long does the phone to board two-button link take to build?

About 180 minutes for a intermediate maker.