MCP2515 CAN bus module
CAN controller and transceiver board for cars and machines.
FunctionCAN controller + transceiver
Supply voltage5 V
InterfaceSPI
Logic level5 V (needs care on 3.3 V boards)
InterfacesReviewedMPN MCP2515 + TJA1050Used in 4 projects
In short
What is the MCP2515 CAN bus module and what is it used for?
CAN controller and transceiver board for cars and machines. Makers use it for OBD-II and CAN projects.
Crystal is often 8 MHz: set this in the library
How it works
An MCP2515 CAN controller handles frames and filters, and a TJA1050 drives the bus.
Key specifications
| Interface module spec | Value |
|---|---|
| Function | CAN controller + transceiver |
| Supply voltage | 5 V |
| Interface | SPI |
| Logic level | 5 V (needs care on 3.3 V boards) |
Pinout
INTInterrupt
SCK SI SO CSSPI
VCC5 V
GNDGround
CANH CANLBus
J1120 Ω terminator
How to use it
Most modules have an 8 MHz crystal, so set the library (mcp_can or autowp) to 8 MHz or nothing will work. The TJA1050 needs 5 V, so with 3.3 V boards use a 3.3 V transceiver such as the SN65HVD230.
Applications
OBD-II and CAN projects
Builds that use it
Alternatives
- MCP2515 CAN controllerController IC
- TJA1050 CAN transceiverTransceiver IC
Common questions
What is the MCP2515 CAN bus module used for?
In maker projects: OBD-II and CAN projects.
How does the MCP2515 CAN bus module work?
An MCP2515 CAN controller handles frames and filters, and a TJA1050 drives the bus.
What voltage does the MCP2515 CAN bus module need?
5 V.
How do I connect the MCP2515 CAN bus module to an Arduino or ESP32?
SPI. Pins: INT (Interrupt), SCK SI SO CS (SPI), VCC (5 V), GND (Ground), CANH CANL (Bus), J1 (120 Ω terminator).
What can I use instead of the MCP2515 CAN bus module?
MCP2515 CAN controller and TJA1050 CAN transceiver.
