Idea
In short
How do you build a tank level meter?
A sealed ultrasonic sensor on the lid of a water butt shows how full it is as a percentage. Keep the electronics dry and away from the water. You need Arduino Nano, Maxbotix MB1010 ultrasonic sensor, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure a water level from above.
Parts list
- Development Boards
- Sensors
- Displays
- Prototyping
How to build it
- Measure the empty and full distances
- Wire the sensor
- Read the range
- Convert to percent
- Average to reduce jumps
Related projects
Common questions
What parts do I need for the tank level meter?
Arduino Nano, Maxbotix MB1010 ultrasonic sensor, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the tank level meter take to build?
About 210 minutes for a intermediate maker.
