Idea
In short
How do you build a fermentation jar watch?
A waterproof probe taped to a jar of dough, yogurt or pickles shows the temperature on a display, remembers the highest and lowest and beeps if it goes outside a range you set. It helps with home fermenting. It is not a food-safety device, so follow a trusted recipe for safe times and temperatures. You need Arduino Nano, DS18B20 waterproof probe, Resistor 4.7 kΩ, SSD1306 OLED Display, Passive buzzer, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Beginner
- Time
- About 80 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Keep a fermenting jar in its comfort range.
Parts list
- Development Boards
- Sensors
- Passives
- Displays
- Motors & Actuators
- Prototyping
- Prototyping
How to build it
- Wire the probe and display
- Read the temperature
- Remember the highest and lowest
- Set a comfortable range
- Beep when it leaves the range
Common questions
What parts do I need for the fermentation jar watch?
Arduino Nano, DS18B20 waterproof probe, Resistor 4.7 kΩ, SSD1306 OLED Display, Passive buzzer, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the fermentation jar watch take to build?
About 80 minutes for a beginner maker.
