Idea
In short
How do you build a pour-over coffee scale?
A load cell and an HX711 weigh coffee and water for a pour-over brew, show the ratio on an OLED and time each stage with a button. Keep the electronics dry and level. You need Arduino Nano, HX711 load cell amplifier, Load cell 1 kg, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 160 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Brew coffee with the right ratio.
Parts list
- Development Boards
- Sensors
- Sensors
- Displays
- Switches
- Prototyping
How to build it
- Mount the load cell between two plates
- Calibrate with a known weight
- Zero with the dose and the jug
- Show the water to coffee ratio
- Time the stages
Related projects
Common questions
What parts do I need for the pour-over coffee scale?
Arduino Nano, HX711 load cell amplifier, Load cell 1 kg, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.
How long does the pour-over coffee scale take to build?
About 160 minutes for a intermediate maker.
