Projects / Ideas / Shower water meter

Shower water meter

IntermediateHome LabIdeaReviewed
In short

How do you build a shower water meter?

A flow sensor shows litres used in a shower and warns at a set amount. You need Arduino Nano, Water flow sensor YF-S201, SSD1306 OLED Display, Active buzzer 5 V and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Count pulses from a flow sensor.

Parts list

How to build it

  1. Count pulses with an interrupt
  2. Convert to litres
  3. Calibrate with a bucket
  4. Show litres and time
  5. Warn at a target

Related projects

Common questions

What parts do I need for the shower water meter?

Arduino Nano, Water flow sensor YF-S201, SSD1306 OLED Display, Active buzzer 5 V and Breadboard 830 Tie Points.

How long does the shower water meter take to build?

About 210 minutes for a intermediate maker.