Idea
In short
How do you build a plug timer with display?
A timer with a display and a relay for a lamp or fan, with a manual override. You need ESP32 DevKit V1, Relay Module 5V, DS3231 RTC module, SSD1306 OLED Display and Tactile push button 6 mm × 3.
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Make a simple scheduled switch.
Parts list
- Development Boards
- Interfaces
- Sensors
- Displays
- Switches
How to build it
- Set on and off times
- Run the schedule
- Override
- Show next event
- Leave the mains side to an electrician
Common questions
What parts do I need for the plug timer with display?
ESP32 DevKit V1, Relay Module 5V, DS3231 RTC module, SSD1306 OLED Display and Tactile push button 6 mm × 3.
How long does the plug timer with display take to build?
About 120 minutes for a intermediate maker.
