Idea
In short
How do you build a bark counter?
A sound sensor counts loud noises such as barks over a day and shows the number on a small screen, with a button to reset. It is a simple way to see how often a noise happens. It listens only for loudness and records no audio, which keeps privacy simple. You need Arduino Nano, Sound sensor module (KY-038), Tactile push button 6 mm, SSD1306 OLED Display, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Beginner
- Time
- About 70 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Count loud barks through the day.
Parts list
- Development Boards
- Sensors
- Switches
- Displays
- Prototyping
- Prototyping
How to build it
- Read the loudness from the sensor
- Set a threshold with the module knob
- Count a bark once per burst
- Show the count on the screen
- Reset the count with a button
Common questions
What parts do I need for the bark counter?
Arduino Nano, Sound sensor module (KY-038), Tactile push button 6 mm, SSD1306 OLED Display, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the bark counter take to build?
About 70 minutes for a beginner maker.
