Projects / Ideas / Garden sensor listener on 868 MHz

Garden sensor listener on 868 MHz

AdvancedIoTIdeaReviewed
In short

How do you build a garden sensor listener on 868 MHz?

A sender in the garden reports soil and light readings to a receiver indoors over a licence-free radio band. You need Arduino Nano, RFM95W LoRa module (868 MHz), DHT22 Sensor, LDR Photoresistor, Resistor 10 kΩ and Breadboard 830 Tie Points.

Level
Advanced
Time
About 300 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Send small sensor packets over a long-range radio.

How to build it

  1. Check the legal band and power in your region
  2. Send a short packet
  3. Add a node ID and counter
  4. Receive and display on a second board
  5. Measure the range outdoors

Related projects

Common questions

What parts do I need for the garden sensor listener on 868 MHz?

Arduino Nano, RFM95W LoRa module (868 MHz), DHT22 Sensor, LDR Photoresistor, Resistor 10 kΩ and Breadboard 830 Tie Points.

How long does the garden sensor listener on 868 MHz take to build?

About 300 minutes for a advanced maker.